For residential, small business, and property maintenance applications, the Impact 440 is the perfect tool. Effortlessly apply any common architectural primer, paint, or finish with this powerful electric airless sprayer. Sprays include latex, lacquers, enamels, stains, and other coatings with low to medium viscosities.
1. Understanding the Titan Impact 440
Titan’s line of tips features unique spray technology that reduces overspray and prolongs pump life, all while putting paint where it belongs. Designed to spray all architectural coatings and paints at 1,000 psi at production speed with optimal efficiency. reduces overspray by up to 55%, enabling more spraying by contractors.
1.1 Key Features
- Durable Construction
It can be used for heavy work.
- Powerful Motor
The 0.54 hp motor delivers consistent power. It will make your work easy with its powerful motor.
- Versatile Spray Gun
The LX-80II spray gun is designed for precision and control. It will give you a fine finish and work as a heavy duty.
- Smart Pump Technology
It will reduce the over-spray and give you quality work.
1.2 Specifications
- Maximum Tip Size: 0.023 inches
- Maximum Flow Rate: 0.54 gallons per minute
- Maximum Operating Pressure: 3,300 PSI
- Weight: 45 pounds
- Hose Length: 50 feet (extendable to 100 feet)
2. Preparing for Use
- Sand the surfaces.
- Prepare and clean the surface that will be painted.
- Cover the area that has to be kept safe.
- Prime and clean once more before spray painting.
- Paint and coat.
2.1 Selecting the Right Paint and Tip
If you want to make your paint good and smooth then choose the right paint and tip for your work. Choose the paint that is suitable for the surface on which you are working. Select the true tip for high coverage and the best results.
- Paint Types:
The Titan Impact 440 can spray a wide range of materials, including latex, acrylics, enamels, stains, and varnishes. Mix the paint before use for a smooth finish.
- Spray Tip Selection:
Choose your spray tip according to your needs. If you want any specific pattern then choose tip accordingly. For example, a 0.015-inch tip is ideal for thin materials like stains, while a 0.021-inch tip is better for thicker coatings like latex.
2.2 Setting Up the Machine
Before plugging in an electric unit’s power cord, perform these steps.
1. Verify that the return hose and siphon tube are securely fastened.
2. Secure a minimum of 50′ of 1/4″ airless spray hose to the sprayer’s outlet fitting using a wrench. Securely tighten.
3. Connect the spray hose to an airless spray gun. Tighten firmly with two wrenches, one on the cannon and one on the hose.
4. Verify that in the black zone, the pressure control knob is in the OFF position.
5. Verify that the switch is in the off position on the ON/OFF set.
6. Use a coin or a straight-slot screwdriver to remove the fill cap.
7. To prime the oiler, press the button two to five times. Press once to lubricate the fluid part after each eight hours of use.
8. To ensure that the inlet ball is free, fully compress the pusher stem.
Verify that the electrical service has a minimum of 15 amps at 120 volts.
10. Place the power cord at least 25 feet away from the spray area in a suitably grounded outlet.
2.3 Preparing the Work Area
To prevent corrosion during transportation and storage of Titan Advantage 440, if this sprayer is brand-new, test fluid is included in the fluid portion during shipment. Mineral spirits must be used to completely clear the system of this fluid before you start spraying.
1. Insert the siphon tube into a mineral spirits container.
2. Insert the return hose into a waste container made of metal.
3. Select the “MIN” setting on the pressure control knob to reduce the pressure to the absolute minimum.
4. Set the SPRAY/PRIME valve to the PRIME setting.
5. Slide the ON/OFF switch to the ON position to activate the sprayer.
6. To flush the test fluid via the return hose and into the waste container, let the sprayer run for 15 to 30 seconds.
7. Slide the ON/OFF switch to the OFF position to shut off the sprayer.
3. Operating the Titan Impact 440
Now that you’re prepared, it’s time to start spraying. If you learn to use the sprayer correctly then your work will also correct.
3.1 Spraying Techniques
- If applied, the following methods will guarantee expert painting outcomes.
- Always maintain an equal distance between the gun and the surface by holding it perpendicular to the surface. The distance between the gun and the substance (e.g., desired spray pattern, surface) should be 12 to 14 inches (30 to 35 cm).
- Move the cannon steadily across the surface or up and down it. Consistently moving the gun saves material and offers uniform coverage. The application of a complete, wet coat of paint without runs or sags is made possible by the proper spraying speed.
- A thinner spray pattern and more paint are applied to the surface when the gun is held closer to the surface. A thinner coat and a larger spray pattern are produced by holding the gun farther away from the surface. To avoid runs, sags, or overspray, switch to a spray tip with a smaller opening. A wider aperture tip should be used if there is not enough paint on the surface or if you would want to spray more quickly.
- Continue using a consistent spray stroke movement. Spray left to right and right to left in alternate directions. Start the gun moving before the trigger is pushed.
Conclusion
We need to ground this product. By offering an escape path for the electric current in the event of an electrical short circuit, grounding lowers the risk of electric shock. This device comes with a cord that has a grounding wire and the proper grounding plug installed. The plug needs to be inserted into an outlet that complies with all local laws and legislation and is grounded and correctly placed.
Also Read: https://usamagazineworld.com/
